Data logger for current 0-20mA, voltage 0-5V and binary signal

Selamat Datang di

Suhu dan kelembaban ( sensor, sistem monitoring online, instrument)

Anggota Gratis

Suhu dan kelembaban ( sensor, sistem monitoring online, instrument)
Indonesia

Katalog Produk

Data logger for current 0-20mA, voltage 0-5V and binary signal

(Gambar)

temperaturehumidity.indonesia@gmail.com

Keterangan:	Data logger for current 0-20mA, voltage 0-5V and binary signal Data loggers are designed for record of voltage signal 0-5V ( optionally 0-10V) or current signal 0-20mA. At the same time state of binary signal can be recorded. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter. Main applications of data logger: * Distant places with no electric power * Long term field measurement * Research and development * Laboratories * Technological processes Advantages of data logger: * included traceable calibration certificate from the manufacturer - Comet * fast data transfer to the PC ( full memory for approximately 30s) * variability of connection to the computer - USB, RS232, Ethernet, GSM modem * permanent connection to the PC enabled, data is possible to download even during logging * large data memory 32000 values * large dual line display with special symbols, switchable * optional display of minimum and maximum measured values ( reset of min/ max memory from PC or by magnet) * dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display * two alarm modes are enabled: instant or with memory ( detected alarm is indicated permanently till alarm memory is cleared) * robust watertight case * easy installation, locking enabled * low power consumption from battery, battery life up to 6 years * indication of remaining battery life, easy replacement of the battery * logging start/ stop is enabled: at certain time and date programmed from computer, by external binary signal or by delivered magnet * also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits * input signal is recalculated and displayed in real measured physical units by means of the PC software * each logger is possible to describe with text of maximum 32 characters * each channel is possible to describe with text of maximum 16 characters * password protection is enabled to prevent unauthorized manipulation with logger TECHNICAL PARAMETERS Measurement accuracy: ± 0.2% FS Resolution of voltage input: 13 bits ( 8192 levels) Resolution of current input: 7900 levels Signal character at binary input: from potential-less contact or two-state voltage signal Minimum pulse duration at binary input: 500 ms ( shorter pulses may not be recorded) Maximum frequency at binary input: 0.5 Hz ( i.e. maximum 5 pulses for 10 s) Power current through contact at binary input: 3 uA ( contact closed) Voltage accross open contact at binary input: maximum 3.6 V Low voltage level at binary input: 0 to + 0.2 V ( maximum current from the input 3 uA High voltage level at binary input: + 3.0 to + 30 V ( maximum current to the input 100 nA Data logging interval: adjustable from 10s to 24hours Display refresh and alarm state refresh: every 10 s Total memory capacity: 32000 values ( in non cyclic mode) Data logging modes: noncyclic – logging stops after filling the memory cyclic – after filling memory oldest data is overwritten by new Operation temperature range: -30 to + 70° C Real time clock: year, leap year, month, day, hour, minute, second Built-in connector for input signals: Canon 9 pins, male Dimensions without connectors: 93x64x29mm Weight including battery: 130g Power: Lithium battery 3, 6V, size AA Typical battery life in operation from -5 to + 35° C: ( if often operated outside of the above temperature range battery life can be reduced to 75% ) 6 years Battery life in continuous on-line mode with interval 1 minute: 4 years Battery life in continuous on-line mode with interval 10 seconds: 1 year Protection: IP67 - protected against influence of temporary immersion into water Warranty: 2 years

Keterangan:

Data logger for current 0-20mA,
voltage 0-5V and binary signal
Data loggers are designed for record of voltage signal 0-5V ( optionally 0-10V) or current signal 0-20mA. At the same time state of binary signal can be recorded. Values are stored to a non volatile electronic memory. Data transfer to the personal computer for further analysis is performed via USB, RS232, GSM or Ethernet interface by means of a proper adapter.
Main applications of data logger:

* Distant places with no electric power
* Long term field measurement
* Research and development
* Laboratories
* Technological processes

Advantages of data logger:

* included traceable calibration certificate from the manufacturer - Comet
* fast data transfer to the PC ( full memory for approximately 30s)
* variability of connection to the computer - USB, RS232, Ethernet, GSM modem
* permanent connection to the PC enabled, data is possible to download even during logging
* large data memory 32000 values
* large dual line display with special symbols, switchable
* optional display of minimum and maximum measured values ( reset of min/ max memory from PC or by magnet)
* dual level alarm is enabled for each channel, alarm is indicated by blinking of the value on the LCD display
* two alarm modes are enabled: instant or with memory ( detected alarm is indicated permanently till alarm memory is cleared)
* robust watertight case
* easy installation, locking enabled
* low power consumption from battery, battery life up to 6 years
* indication of remaining battery life, easy replacement of the battery
* logging start/ stop is enabled: at certain time and date programmed from computer, by external binary signal or by delivered magnet
* also special logging mode is enabled, when logging runs only, if some of measured values are out of adjusted alarm limits
* input signal is recalculated and displayed in real measured physical units by means of the PC software
* each logger is possible to describe with text of maximum 32 characters
* each channel is possible to describe with text of maximum 16 characters
* password protection is enabled to prevent unauthorized manipulation with logger

TECHNICAL PARAMETERS
Measurement accuracy: ± 0.2% FS
Resolution of voltage input: 13 bits ( 8192 levels)
Resolution of current input: 7900 levels
Signal character at binary input: from potential-less contact or two-state voltage signal
Minimum pulse duration at binary input: 500 ms ( shorter pulses may not be recorded)
Maximum frequency at binary input: 0.5 Hz ( i.e. maximum 5 pulses for 10 s)
Power current through contact at binary input: 3 uA ( contact closed)
Voltage accross open contact at binary input: maximum 3.6 V
Low voltage level at binary input: 0 to + 0.2 V ( maximum current from the input 3 uA
High voltage level at binary input: + 3.0 to + 30 V ( maximum current to the input 100 nA
Data logging interval: adjustable from 10s to 24hours
Display refresh and alarm state refresh: every 10 s
Total memory capacity: 32000 values ( in non cyclic mode)
Data logging modes: noncyclic – logging stops after filling the memory
cyclic – after filling memory oldest data is overwritten by new
Operation temperature range: -30 to + 70° C
Real time clock: year, leap year, month, day, hour, minute, second
Built-in connector for input signals: Canon 9 pins, male
Dimensions without connectors: 93x64x29mm
Weight including battery: 130g
Power: Lithium battery 3, 6V, size AA
Typical battery life in operation from -5 to + 35° C:
( if often operated outside of the above temperature range battery life can be reduced to 75% ) 6 years
Battery life in continuous on-line mode with interval 1 minute: 4 years
Battery life in continuous on-line mode with interval 10 seconds: 1 year
Protection: IP67 - protected against influence of temporary immersion into water
Warranty: 2 years

Kenalkan ke teman Anda

Korespondensi Perusahaan
Nama:	Tn. Syafei [Administrasi]
E-mail:	temperaturehumidity.indonesia@gmail.com
Nomer HP:	0812 800 69 024, 0813 9929 1909, 0817 6700 726, 0815 1963 9621, 0815 614 1954 (Fikri), 0811 893 101 (Tasnim)
Nomer Telpon:	+62-21-8611 259, 8611 131, 8611 212, 8611 444, 8611 449
Nomer Faks:	+62-21-8611207
Alamat:	Jl. Pahlawan Revolusi No. 22B Jakarta 13430, Jakarta Indonesia

Membuat situs langsung jadi?
Silahkan Klik disini!